Annual Report
CT scans of a piraƱha, a Mexican beaded lizard, and an iodine-injected frog

New 3D Scanning Campaign

$2.5 million in National Science Foundation funding for "Open Exploration of Vertebrate Diversity in 3D."

Six 2D Materials Processing example images

2D Materials Processing

MoS2 random micro flakes over a SiO2 substrate were mapped and then precisely patterned for transmission line measurements.

Spiral Mirror Lens on Flat and Curved Surfaces

Spiral Mirror Lens on Flat and Curved Surfaces

A spiral designed lens was fabricated on both flat and curved surfaces.

High Electron Mobility Transistor (HEMT) device - layout (left), die in process (right)

AlGaN/GaN High Electron Mobility Transistor (HEMT)

The field of III-N semiconductors has gained a lot of attention for use in high speed and high power switching as well as solid-state sensors.

Micro Molds for PDMS Stamps

Micro Molds for PDMS Stamps

A variety of molds for polydimethylsiloxane (PDMS) casting were created in silicon (Si) wafers.

Solid-State Sensors

Solid-State Sensors

Solid-state sensors are advancing rapidly and are being placed in a wide array of applications from mechanical movement (accelerometers), sounds (microphones), and bio detection (glucose, pathogen).

Photo of a lizard, a CT-Scan image of lizard, a photo of a 3D printed lizard from CT-Scan

Nano-CT & 3D Printer

Specimens were scanned with a GE V|tome|xm 240 CT Scanner to obtain high resolution 3D images of the entire specimen.


News & Announcements

About RSC Posted on Tue, Aug 25, 2015 at 10:28 AM

The Herbert Wertheim College of Engineering's Research Service Centers (RSC) support and enhance the research, education, and public service missions of the University of Florida by providing access to characterization and process instrumentation. Expert staff provides the assistance and guidance necessary so that students, faculty, and industry get the most effective and appropriate use of the center's facilities.

ToScA North America 2019 Posted on Fri, Jul 27, 2018 at 1:09 PM

ToScA North America 2019

Dates: March 6-8 2019
Location: University of Florida

Tomography for Scientific Advancement

2019 Symposia Chair and Local Organiser:
Ed Stanley (University of Florida)

ToScA Chair:
Dr Farah Ahmed (NHM, UK)

ToScA North America Sub Committee Chair:
Dr Jessie Maisano (UTCT, Texas)

The Royal Microscopical Society is delighted to announce that the second ToScA North America Symposium is to be held at the University of Florida. Following on from the success of the 2017 symposium, held at The University of Texas at Austin, we once again will provide an opportunity for open discussions, networking with researchers and commercial industry representatives, and a platform to engage in collaborations.

More Information

See All News >