Litho Process Laurell Spinner E-Beam Bay & Hot Plate/Oven - Status: Available
||Description: The E-beam Bay Laurell Spinner is used to manually apply PMMA ONLY. NO OTHER MATERIALS MAY BE USED.
The use of photoresist support equipment (not tracked/ charged) is built into the spinner charge rate. Support equipment includes: HMDS hotplate, soft bake hotplates, hard bake hotplates and ovens.
Spin Coating wiki link
Photolithography wiki link
Photoresist wiki link
Microfabrication wiki linkLatest Status Log EntryOct 3, 2022 - Resource Status Up - up from shutdown
|Computer Access||Requires computer access be setup||Check Your Status|
|Funding Source||Requires permission to an active funding source||Check Your Status|
|Work Plan||Requires a work plan be approved by PI and staff||Check Your Status|
|Agreement Form||Requires completed agreement form for equipment usage||Check Your Status|
|RSC Safety Training||Requires completion of safety training||Check Your Status|
|NRF Building Access||Requires issue of an id badge and entry badge and/or access level to be set.||Check Your Status|
|Equipment Training||Requires completion of equipment training||Check Your Status|
An active Gatorlink login is required to create a new reservation.